Modif phare S1

Post Reply
François B
Posts: 366
Joined: Sun Feb 19, 2006 10:03 pm
Location: Tours-37-France
Contact:

Modif phare S1

Post by François B »

Quelqu'un a il fait la conversion ?
http://www.elise-shop.com/index.php?mai ... cts_id=130
User avatar
inside00
Posts: 555
Joined: Mon Mar 20, 2006 6:52 pm
Location: Lausanne

Post by inside00 »

pas moi, mais en tout cas en Suisse c'est pas homologué car avec des phares xénon tu doit avoir un correcteur d'assiette automatique et un lave-phare..... :roll:
User avatar
Pschitt
Posts: 1172
Joined: Fri Jun 27, 2003 10:40 pm
Location: en Gruyère
Contact:

Post by Pschitt »

Quelqu'un connaîtrait-il le modèle ou les références d'une autre optique que celle d'origine - pour rappel celle d'une R4 - dont le rendement serait meilleur ? :?
Quelle provenance (marque/modèle), diamètre, etc...?
User avatar
fentuz
Posts: 979
Joined: Sat Jul 08, 2006 11:34 am
Location: Cirencester (UK)
Contact:

Post by fentuz »

C'est pas de R4L....

Ce sont de Cibie ou valeo maintenant
En RHD
CIBIE : CBC 067689
VALEO : 067689

En LHD, c'est 90 au lieu de 89
Image
Image
User avatar
Pschitt
Posts: 1172
Joined: Fri Jun 27, 2003 10:40 pm
Location: en Gruyère
Contact:

Post by Pschitt »

N'est-ce pas Cibié qui équipait déjà les R4L...? :roll:
User avatar
fentuz
Posts: 979
Joined: Sat Jul 08, 2006 11:34 am
Location: Cirencester (UK)
Contact:

Post by fentuz »

C'est peut etre des cibie qui equipe les 4L mais ce sont pas les memes que les S1. Les 4L ont les veuilleuses separees et pas les S1 ;)

[edit]
Image
Les loupiottes a cote des clignotants


http://elise-faq.info/index.php?title=Lights
The headlamps are manufactured by Cibie, but are NOT the same as used on the Renault 4, despite being the same diameter (they actually contain sidelights and have a different lens assembly).

They are 6" in diameter, and have the following code numbers:

CIBIE : CBC 067689
VALEO : 067689

The headlamp mountings (not the headlamps themselves) are notorious for rusting in situ, and the only solution for this is to replace them with a non-corrosive item (available from several 3rd party stockists). This needs to be bonded to the glass fibre and set up properly.

When replacing the sidelight, please note that the holder is purely push-fitted into a grommet on the lamp, so watch out that you don't lose the bulb into the clam when replacing.
Image
Image
Post Reply